Chem Bituseal HP is a rubber-based bitumen sealant that is made with selected Bitumen and Rubberized is best due to the reason that if heated many times it will come back to the same flexibility and adhesion on cooling.
Chem Expansion ST-1000 are EXTRA high load bearing system ideal for vehicular traffic areas such as parking garages , factories and warehouses.
Chem Hypalon Joint Seal is a high performance joint sealing composite system which is based on Hypalon flexible sheeting used with epoxy resin adhesive. When fixed to the joint, allows considerable movement in more than one direction, and maintaining a high quality seal. It is suitable for both irregular & high movement joints.
Chemseal PS is a two-part, self-leveling or gun grade polyurethane sealant which cures at ambient temperature to a flexible tear-resistant rubber. It is highly resilient and has excellent recovery characteristics after extended periods of compression or elongation.
Chemseal PU-600 is a general purpose one component. Polyurethane sealant which cure by moisture to an elastic and through sealant. It is highly resilient and has excellent recovery characteristics. It can function under wide range of temperatures.
EPE Filler Board is expanded poly ethylene foam having a cross linked closed cell polymer and widely known as compressible Expansion Joint Filler Board. It is flexible as well as has high compression-recovery, therefore suitable for application at places which require readily compressible low load. This filler board is non-tainting and therefore suitable for use in potable water retaining and water excluding structures.